Triplex plunger pump with 90 kW, three plungers and up to 3,140 bar for industrial high-pressure cleaning, load cycle testing and process applications. Flow rate up to 283 l/min, pump heads A, M and M2, available to API 674.
Pressure max.
3,140 bar
Flow rate max.
283 l/min
Drive power
90 kW
Plungers
3
Pump heads
A, M, M2
Weight
255 kg

Tell us the K9000-3G series in the form, along with pressure, flow rate and medium. KAMAT selects the plunger size, pump head and drive and prepares a quotation.
KAMAT Triplex Plunger Pump K9000-3G for the Medium Power Range
The K9000-3G is a triplex plunger pump with 90 kW drive power for industrial applications in the medium power range. It reaches up to 3,140 bar at 13 l/min and delivers up to 283 l/min at 150 bar. Typical fields of application are industrial high-pressure cleaning, load cycle testing and process applications with demanding media.
More Pressure, More Possibilities
Compared with the K8000-3G, the K9000-3G offers more power reserves, even with media of up to 2,000 mPas viscosity and 200 °C temperature, at reduced speed and with suitable seals. The KAMAT modular system allows the pump heads to be changed quickly when requirements change.
Two Lubrication Concepts
The K9000-3G is available with splash or forced lubrication and can thus be adapted to different operating conditions, including 24/7 operation. Above 75 kW, the gearbox works with an oil cooler.
Special Features
- Minimum inlet pressures depending on the pumped medium
- Speed max. 530 rpm, speed range 10–100% depending on rod load
- Gearbox with forced lubrication, above 75 kW with oil cooler
- Standard gear ratios i = 2.75 – 3.22 – 3.68
- Can also be operated vertically
- Also available to API 674 (speed max. 400 rpm)
- Special media such as seawater, glycol, methanol or oils on request
Your Benefits at a Glance
High Pressure Reserve
Up to 3,140 bar at 13 l/min
Demanding Media
Up to 2,000 mPas viscosity and 200 °C
Two Lubrication Concepts
Splash or forced lubrication, also for 24/7 operation
Modular Design
Quick change of the A, M and M2 pump heads
Vertical Operation Possible
Can also be installed in a vertical position
Oil Cooling
Above 75 kW with oil cooler
Technical Data
Flow rates at 100% volumetric efficiency and 20 °C ambient temperature. Pressure ratings for continuous operation; in intermittent operation (3 h/day), 10% higher pressure is possible.
Head type: the digit indicates the head version (e.g. 2 under A = A2), matching the CAD files under Downloads.
Segments and Typical Applications
Typical fields of application for the K9000-3G. KAMAT designs the pump for your operating point based on your enquiry.
Free Enquiry
Tell us the K9000-3G series, pressure, flow rate, medium and operating hours per year. KAMAT selects the plunger size, pump head and drive and prepares a quotation.
On request, KAMAT carries out the acceptance run in Witten as well as commissioning, training and maintenance on site (Service). For short-term needs, pumps and units available immediately are on hand.
or call us directly: +49 2302 89 03 0
Frequently Asked Questions About the K9000-3G
Depending on the plunger size, between 13 l/min at 3,140 bar (plunger 9012) and 283 l/min at 150 bar (plunger 9055), each at 90 kW drive power. The values apply to 100% volumetric efficiency and 20 °C.
Three head types from the KAMAT modular system: the A head for plungers 9012 to 9032, the M head for 9022 to 9028 and the M2 head for 9030 to 9055. The pump head can be changed if the requirement changes.
Water as well as demanding media with up to 2,000 mPas viscosity and 200 °C temperature, depending on the pump head, materials, seals and speed. KAMAT designs for special media such as seawater, glycol, methanol or oils on request.
Yes. The K9000-3G is also available to API 674, the standard for reciprocating positive displacement pumps in the petroleum, petrochemical and natural gas industries. In the API version, the pump runs at a maximum of 400 rpm instead of 530 rpm, and flow rates are correspondingly lower.













