API 674: Standard for Reciprocating and Plunger Pumps

API 674 is the globally recognised industry standard of the American Petroleum Institute for reciprocating positive displacement pumps such as plunger pumps. The standard sets out requirements for mechanical design, construction, operational safety and ease of maintenance.

Key Facts

Publisher
American Petroleum Institute
Applies to
reciprocating positive displacement pumps
Current edition
3rd edition, December 2010
KAMAT
API 674 compatible up to 4,000 bar

The API 674 Standard at a Glance

Using the principle of positive displacement, API 674 pumps deliver constant volumes at high pressures, even with changing media and operating conditions. The main fields of application are the oil and gas industry, petrochemicals and high-pressure processes in water treatment. KAMAT builds API 674 compatible plunger pumps for pressures up to 4,000 bar.

API 674 (Positive Displacement Pumps, Reciprocating) is published by the American Petroleum Institute. The current version is the 3rd edition of December 2010 with errata up to April 2015 and reaffirmation in November 2016. It defines the technical requirements for reciprocating pumps in the process industry, with a focus on operational safety, reliability and ease of maintenance at high pressures.

In Witten, KAMAT develops and manufactures modular high-pressure plunger pumps, which are built to API 674 on request.

Key Requirements

  • Continuous operation at high pressures: usually up to 1,000 bar and more. KAMAT pumps can be realised up to 4,000 bar.
  • Low pulsation thanks to triplex or quintuplex design.
  • Long service life thanks to low-wear components, matched sealing systems and high-quality materials.
  • Ease of maintenance thanks to modular design, externally accessible seals and low-wear valves.
  • Monitoring via standardised interfaces for sensors and condition diagnostics.

Typical Applications of API 674 Plunger Pumps

  • Oil and gas industry: injection of methanol or glycol for hydrate prevention and gas dehydration, also with water injection pumps.
  • Petrochemicals and refineries: precise dosing of aggressive or viscous media with chemical pumps.
  • Power and power plant engineering: boiler feed and desalination.
  • Water and wastewater treatment: reverse osmosis and high-pressure desalination.
  • Steel and heavy industry: descaling and cleaning at very high pressure.

API pumps work wherever delivery processes must run continuously and without errors under extreme conditions.

Advantages of Modern Designs According to API 674

Easy to Maintain

External oil seals give access to all sealing systems without draining gear oil or opening the pump casing.

Short Downtimes

Simple maintenance shortens downtimes and lowers the risk of assembly errors.

Quiet and Available

Smooth running, in sound-insulated container solutions if required. High-quality materials, wear-resistant valves and optimised sliding guides ensure long running times.

API 674 Compatible Pumps from KAMAT

All KAMAT pump models are based on the modular modular system, which allows adaptation to different requirements, including API 674.

Plunger stroke, speed and plunger velocity are key parameters of API 674. The state of the art often allows higher values: KAMAT pumps reach higher plunger velocities and speeds with the same operational safety. This results in more compact sizes, an advantage where full API conformity is not required.

If 100 percent API 674 conformity is required, KAMAT supplies adapted models with reduced speed, lower plunger velocity or a larger size.

Parameter API 674 KAMAT standard Remark
Plunger velocity max. 1.4 m/s up to 2.1 m/s more power with a smaller footprint
Materials according to standard partly above standard (e.g. duplex, Inconel) higher corrosion and wear resistance
Lubrication external oil pump integrated via pinion shaft fewer components, simpler maintenance
Material certificates per project EN/ASTM combination documented and project-specific
Operating concept continuous “uninterrupted” defined including service
KAMAT plunger pump according to API 674

Frequently Asked Questions About API 674

The 3rd edition of December 2010, with errata up to April 2015 and a reaffirmation in November 2016.

A robust design for continuous operation at high pressures, low pulsation thanks to triplex or quintuplex designs, low-wear components, ease of maintenance and interfaces for sensors and condition diagnostics.

In the oil and gas industry, for example for methanol and glycol injection, in petrochemicals and refinery engineering, in power plants for boiler feed, in water treatment for reverse osmosis and in the steel industry for descaling.

The standard usually assumes discharge pressures of up to 1,000 bar and more. With KAMAT pumps, up to 4,000 bar is technically feasible.

Yes. All KAMAT pumps are based on a modular system, and adapted models are available for applications requiring 100 percent API 674 conformity. Where full conformity is not required, higher plunger velocities and speeds allow more compact sizes.