and
Please fill in parameters. Select nozzle type and requested characteristic first. Please fill in numbers.

Technical Specification

Flow 117 - 3482 l/min
Pressure 60 - 3500 bar
Power Input 400 - 800 kw
Weight 3650 kg

Characteristics

  • Quintuplex pumps, in order to avoid cavitation
  • Gear with forced lubrication and oil cooling
  • Integrated gear reduction-ratio
  • Also available in accordance with API 674 and/or ATEX
  • Special media, such as sea water, glycol, methanol, oils etc., on request
  • Filtration up to 350 µm

Order documentation

We send you the documentation for your Pump System. Click Here

Pump large Volume Flows with five Cylinders without Cavitation

With an input power of 800 kW, the K 80000 high-pressure pump is an extremely powerful pump. As a five-cylinder pump (quintuplex), it offers the possibility to pump in many applications without inlet boost pressure. Its special five-cylinder design allows large volume flows without cavitation in the pump. Similar to its smaller counterpart the K 50000, it is used for large jetting or hydraulic tasks. It is used especially as a high-end pump in mining, as a work-horse in water hydraulics and in steelworks, as well as in large systems of the oil and gas industry. The gearbox with oil forced lubrication and oil cooler enables a secure, continuous, operation of the high-pressure pump.

Technical Data

Pump Q max. l/min p max. bar @ kW Head types
400 kW 500 kW 630 kW 800 kW
80022 117 1775 2220 2800 3500 A1 UHP
80024 139 1490 1865 2350 2980 A1 UHP
80026 163 1270 1590 2000 2545 A1 UHP
80028 190 1095 1370 1725 2190 A1 UHP
80032 248 840 1050 1320 1675 A1 UHP
80036 313 660 830 1045 1325 A2
80040 387 535 670 845 1075 A2 / MCH
80045 490 425 530 665 845 A2 / MCH
80050 604 340 430 540 685 A2 / MCH
80055 731 280 355 445 565 M1/ MCH
80060 870 235 295 375 475 M1/ MCH
80065 1022 205 255 320 405 M1 / MC1
80070 1185 175 215 275 350 M1 / MC1
80075 1360 150 190 240 305 MC1
80080 1547 130 165 210 265 MC1
80085 1747 115 145 185 235 MC1
80090 1958 100 130 165 210 MC1
80095 2182 95 115 150 190 MC1
80100 2417 90 110 135 175 MC2
80110 2925 70 90 110 145 MC2
80120 3482 60 75 85 125 MC2
n max. = 440 1/min i = 3,40;4,10;4,69;5,19;6,03 API 674 = max.290 1/min
UHP = Ultra High Pressure
Technical data is based on 100% volumetric efficency and 20°C ambient temperature
The right to technical changes is reserved
  • 1 bar = 0,1 MPa = 14,5 PSI
  • 1 l/min = 0,2642 US-GPM
  • 1 kW = 1,36 HP
Issue: 02/2016

Dimension drawing / Available Head types

Dimension Drawing K80000 5g High Pressure Head A1 Kamat
Type A1
Dimension Drawing K80000 5g High Pressure Head A2 Kamat
Type A2
Dimension Drawing K80000 5g Compact Head M Kamat
Type M
Dimension Drawing K80000 5g Low Pressure Head Mc1 Kamat
Type MC1
Dimension Drawing K80000 5g Low Pressure Head Mc2 Kamat
Low-Pressure Head MC2
Dimension Drawing K80000 5g Low Pressure Head Mch Kamat
Type MCH
Dimension Drawing K80000 5g Foot Drawing Kamat
Foot

Applications

Efficient Paint Removal

Metallic surfaces, for example of ships, painted metal roofs or painting cubicles, can be cleaned safely with KAMAT high-pressure systems. More

Rust-Removal of Ships with High-Pressure Water

An Italian partner of KAMAT achieved a rate of up to 40 square meters per hour removing in the rust from dry docks with high-pressure guns. The surface quality WJ-2 was achieved. More

Gentle Removal of Deposits in Pipes

With the special TORNADO high-pressure system from KAMAT, pipework in industry, conduits or heat exchangers, can be freed of deposits efficiently and gently. More

Save Energy: Cleaning Hulls with High Pressure

If hulls are freed from algae, mussels and other sea organisms, the energy expenditure for the ship's drive unit decreases considerably. KAMAT high-pressure systems clean gently and efficiently. More

Landing strips: Clean and secure

A special high-pressure cleaning vehicle frees runways of stubborn rubber abrasion from aircraft tires. The vehicle developed by KAMAT cleans the concrete with high pressure up to 2,500 bar. More

Targeted Removal of Concrete with High-Pressure Pump Systems

With high-pressure technology in the range between 2,000 and 3,000 bar, porous concrete can be removed without damaging the reinforcement. Also coatings are removed in this way free of residue. More

Secure Support of Hollow Spaces in modern Face Construction

KAMAT hydraulic stations for mining enable a fast conversion of the shields in modern face construction. Thus high removal speeds of the extraction machines can be realized. More

Descaling Steel efficiently

Rolling mills employ KAMAT high-pressure pumps in order to descale slabs or billets hydromechanically. In case of descaling by means of high-pressure water, the pressure can be optimally adjusted for the respective material. More

Pump Accessories

High-Pressure Valves up to 4,000 bar

Our internally-developed, high-pressure valves ensure a constant pumping rate, even in case of maximum pressure applications with changing operating states. More

Downloads

Type Download
Quintuplex Plunger Pump K 80000 - 5G Technical Data [553 KB]

Contact Person International

Industry Andreas Meyer
Mining Wladimir Semenkow

Contact Form / Order Documentation

Form of Adress
We would like to get in touch with you regarding your concrete wishes or your individual questions. No matter which kind of industry or what kind of application you have: You will be surprised how precisely our high-pressure technic and our wide range of products fits your needs. Now is the best time to talk to us. We look forward to you.
Form of Address*
Your Datas
Your Message
Order Documentation
data protection checkbox*
Please fill out all fields marked with an *