Please fill in parameters. Select nozzle type and requested characteristic first. Please fill in numbers.

Used Machines and Demonstrators favourably Priced

Refurbished Quality Products at Stock

KAMAT has demonstrators that are not only rented out but also sold. Also our customers renew their machine park regularly so sometimes used machines can be found here.

The demonstrators are built to the newest technological standards and can be looked at as new. As these demonstrators have only been used for very few hours they are more or less run in well.

Used machines are thoroughly checked by KAMAT and are renovated to a status that immediately allows to run them. The safety level of these renovated machines is absolutely up to date.

Used Devices for Sale

[Translate to Englisch:] K 80040 A2 – 5G

K 80040 A2 – 5G


Q =  387  l/min
p =  1075bar
P =  800  kW
n =  440  rpm
i   =  3,4 for 1500 rpm
Drive shaft right side

Material Specification Pump:

Pump head                                              Stainless
Parts coming into contact with fluid         Stainless
Suction manifold                                      Nickel-plated steel
Plunger                                                    Ceramic

Consisting out of:

  • Gear K 80000-5G with oil pressure supply and oil cooler
  • Pumphead type A2
  • Conversion kit 40 mm
  • Pneumatic pressure regulator
  • Adapter for assembling of the pneumatic pressure regulator to the pump head
  • Plug for measurement connection of pneumatic pressure regulator
  • Mounting block
  • Pressure gauge
  • Safety valve
  • Tool kit
  • Painting: RAL 6018
  • Standard operating instructions

KAMAT HD-Gerät 4524 MCH-G - E 45 B


Nominal capacity                                          Q  =           44 l/min
Working pressure                                          p   =           530 bar
Power input                                                   P  =           45 kW
Stroke                                                            s   =           650 mm
V-Belt drive with ratio 2,3 for                        nm =      1500 rpm
Drive shaft right side

Fluid                                                             non turbulent water
                                                                     free of gas and dissolved gas

pH value                                                          6 < pH < 8,5
Conductivity                                                    300 - 1000 µS/cm
Solids content                                                  1,5 – 3% mass
Temperature of fluid medium                           max. 50 °C 
Filtration                                                           < 250 µm
Required inlet pressure                                    min. 1,5 bar
Suction manifold pressure                               max. 8 bar


KAMAT HP Pump Unit K 4524 MCH-G – E 45 B consisting of:

  • Gearbox K 4500 with splash oil lubrication for V-belt drive
  • Pump head Type "MCH"
  • Safety Valve
  • Mounting block with discharge connection M 24 x 1,5 DKO
  • Pressure gauge
  • Conversion kit 24 mm
  • Pneumatic pressure regulating valve as pressure limiting valve

Control Cabinet with all necessary Alarms

  • Automatic star delta switch kW, IP 54 with hour meter and control lamps, indicating all operating data from the motor and hp-pump, main switch, local/remote switch, remote control socket, single channel switching amplifier, emergency stop switch, fault reset switch

Electric motor

45 kW, 400/690V, 1500 Upm, 50 Hz, IP 55, B3, 4-polig nach IEC



  • V-belt drive in-between pump and motor with protective cover
  • Pneumatic pressure panel with pneumatic pressure gauge and electro - pneumatic valve for pressure regulation
  • Compressor with electric motor for internal air pressure supply
  • Stainless steel suction line with filter with flange connection and suction stabilizer type 1, zinc coated
  • Low fluid pressure alarm
  • Stationary base frame with vibration dampeners and lifting eyes
  • Painting: Pump and additional parts RAL 6018 green
  • Base frame in RAL 5003 blue

  • 1 set of KAMAT-Standard-Documentation in English language on CD


Technical Data:

Nominal Flow                 Q = 29 l/min
Discharge Pressure         p = 2950 bar
Required Power              P = 160 kW

KAMAT High Pressure Pump K10016A1-3G consisting of:

  • Gear Box with force-fed lubrication and Cooling
  • Oil Pressure and Oil temperature Alarm
  • Pump Head Type A1
  • Conversion Kit 16 mm
  • Shut-Off-Valve
  • Safety Valve
  • Pressure Gauge
  • Pressure Transmitter
  • Elastic disengageable flanged Coupling

Volvo Dieselengine TAD 582 VE

160 kW @ 2300 rpm, water cooled
Latest Emission Level Stage 5

Control PLC with all necessary Alarms

Automatic Pressure Control / Rev-Control
Remote Control with Cable Reel 50m with MIL Standard Sockets/Plugs
Remote Control for Pressure On/Off and Emergency Stop

- Stainless Fluid Supply

Installed on a
Two axle road going trailer, 80km/h

  • Soundproofing Canopy
  • 4 Large Service Doors
  • Central Drainage
  • Cooling Air Openings closable

Container Unit

Technical Data:

Nominal Flow                Q = 188 l/min
Discharge Pressure       p = 1000 bar
Required Power             P = 350 kW

KAMAT High Pressure Pump K 35036 A2 -3G consisting of:

  • Gear Box with force-fed lubrication and Cooling
  • Oil Pressure and Oil temperature Alarm
  • Pump Head Type A2
  • Conversion Kit 36 mm
  • Shut-Off-Valve
  • Safety Valv
  • Pressure Gauge
  • Pressure Transmitter
  • Pneumatic Pressure Regulator with Ceramic Wearing Parts
  • Elastic disengageable flanged Coupling 

Volvo Dieselengine TAD 1385 VE:

  • 405 kW @ 1900 1/min, water cooled
  • Latest Emission Level Stage 5
  • Chalwyn Flap

Control Cabinet with all necessary Alarms:

  • Automatic Pressure Control /Rev-Control
  • Including GSM / MPI Datatransfer,
  • 900/1800 850/1900 MHz, Flashmemory 128 MB,   
  • Expandable by SD-Card Slot max. 32 GB.
  • Magnetic Rod Antenna
  • SIM-Card is Customer Provision
  • Remote Control with 2x50m cable drums with MIL Standard Sockets / Plugs
  • Remote Control for pressure On/Off and Emergency Stop
  • Stainless Fluid Supply
  • Booster Pump driven by Engine
  • Stainless Steel Header Tank, 2,6m³
  • Stationary Base Frame on flexible Feet

Installed in a
20“ Iso Container:

  • Soundproofing
  • Front double Gates
  • Two Staff Doors
  • Central Drainage
  • Equipped with 8 ISO Corner Fittings and Forklift Pockets for Transport
  • Supply Air Openings closable

All information and more pictures here.

K 108  A - DL 15 T mobil

  • High pressure pump K 108 A with stainless steel pump head and tungsten carbide plunger
  • Disc holder with burst disc 2500 bar and pressure gauge
  • Standard water filter ID 18 – mesh size 25 μm and low level fluid control
  • Timing belt and timing belt pulley with protection hood
  • Diesel engine HATZ 15 kW, 2900 rpm with engine safety control and key switch, hours run meter,
  • Manual speed adjustment, oil pressure control engine, 20 l fuel tank and battery 12V
  • Mobile frame with air tired wheels
  • Painting: RAL 6018

Please feel free to download the information here.

Your Contact Person

Sales Director/Business Development Andreas Meyer
Sales Manager Carlos Maicas

Pump Inquiry

Form of Adress
Spalte links
Spalte rechts
Please fill out all fields marked with an *